Hong Kong IFly Electronics Co., Limited
LINK SMARTER. FLY HIHGER. SEE FARTHER
Add to Cart
Air system MIMO Antenna 70km COFDM Wireless Transmitter For Fixed Wing drone
FIM-1440 mini transceiver is developed based on COFDM technology with 300Mhz-2Ghz for your option for long range. It is widely used for Drones air to ground 70km range and robot ground to ground NLOS 1-2km HD Video transmitting. With Ethernet and HDMI interface, the receiver could output video to PC and monitor at same time.
Key Features
Frequency Option
Applications
UAV HD Video Transmitter-70km-Super Long Distance
Specification
| Wireless Channel | 300Mhz-2Ghz for your option |
| Communication Bandwidth | 2/4/8MHZ |
| RF Transmission Power | 2.5W |
| Data Rates | 1.5/3/6Mbps |
| RX Sensitivity | -108dbm@2Mhz/-103dbm@4Mhz/-97dbm@8Mhz |
| Encryption | AES128 |
| End to End latency | 50-70ms for 1080P60/720P60 encoding and decoding |
| Interfaces on Tx | 1080P60 HDMI RX×1 |
| Power Input Interface--XT30 Industrial Grade ×1 | |
| USB 2.0--Connecting with PC for configure | |
| SMA RF ×1 | |
| Interfaces on Rx | 1080P60 HDMI Mini ×1 |
| LCD--Displaying RSSI and link state. | |
| Buttons×5--For configuring receiver model. | |
| Power Input Interface--XT60 Industrial Grade ×1 | |
| SMA RF ×1 | |
| Ethernet to RJ45 ×1 | |
| Wireless Fault Tolerance | FEC/MPEG |
| Modulation | DVB-T/DVB-T2/DVB-T2 |
| Distance Range | Air to ground: 40-45km Notes:True distance is related to the environment. |
| Ground to ground: NLOS 1-2km | |
| Start Time | 5s |
| Power Input | DC 14-18V(Tx)(DC16V is suggested) DC 10-14V(Rx)(DC12V is suggested) |
| Re-connection time | Less than 1s after signal has been recovered |
| Adjustment of COFDM | QPSK one-way |
| Power Consumption (Maximum) | Transmitter terminal: 25W Receiver terminal: 11W |
| Temperature Range | Operating temperature: -40—85℃ Storage temperature: -55 - 125℃ |
| Dimensions | TX: 97mm×57mmx30mm RX: 91mm×72mmx30mm |
| Radiator | Fan cooler or aluminum heat sink |
| Gram | TX: 200g RX: 202g |
| Metal Case | Conductive anodizing craft |
| CNC Technology | |
| Double Aluminum Alloy Shell |
Dimension:
TX: 97mm×57mmx30mm
RX: 91mm×72mmx30mm